GRAPAS 2012, Thailand Parts VII & VIII

Capping off this week’s GRAPAS 2012 series we bring you a double-header of expertise from the distinguished (and it Part VII very sharply dressed) speakers that attended the event in Thailand earlier this year.

First up in Part VII we are introduced to Jean-Claude Poncet of Vibrafloor, a French organization that specializes in, you’ve guessed it, vibrating floors.


In Part VIII Chanchai Rukthanannond delivers his closing speech bringing the curtain down on another fantastic show for 2012. As Chairman of the Thai Rice Millers Association Mr Rukthanannond was delighted to have welcomed so many experts and industry leaders to GRAPAS 2012.

Media supporter and Director for Perendale Publishers Limited Roger Gilbert has since said, “It was a pleasure to be involved in the event and having such a diverse selection of speakers all of whom were very interesting made it really successful.

 

GRAPAS 2012, Thailand Part VI

Good morning subscribers and valued listed IMD companies. I am sure that you are all busy getting everything together to make your IMD profile the best it can be for 2012/2013. Well take a break, have a sit down and enjoy the wisdom of Dennis Peukert of Amandus Kahl who discusses Hydrothermal Treatment of Feed in this edition of GRAPAS 2012.
Amandus Kahl is a German milling technology firm with a specialization in just about everything there is from mixers & grinders to weighing equipment, for whom Dennis is an Area Manager in the international market.

IMD COUNTDOWN BEGINS: 48hours

Hello again to our valued subscribers and listed companies.
It has been a very busy few months here at IMD HQ and we are just about to reach the top of that mountain as the countdown has now begun for companies to submit EVERYTHING to appear in IMD 2012/2013 the 21st printed edition of the worlds most comprehensive guide for the milling industry across the world.

If you want to be part of it, here’s what you need to do by 17:30 GMT on Friday August 24th, 2012.

– Visit www.internationalmilling.com and register your company (if you haven’t already).

– Check your contact details, category listings and make changes where you need to.

– Make sure that you have got everything you need in terms of company logos, synopsis, adverts and equipment guides (please do get in touch asap if any of these are of concern to you!).

– Equipment Guides must be submitted (if somehow you have missed any of my numerous reminders and info packs please check our archive for information on them)

– Submit ALL relevant artwork for your adverts, equipment guides and company profile pages.

– ORDER your copy of IMD 2012/2013.

Once you have ticked all of these boxes… relax. We’ll do the rest.

All the best
Alex Rogers

IMD Coordinator

GRAPAS 2012, Thailand Part V

Welcome again to our devoted subscribers to MillingInternational, the home of information from the hub of the International Milling Directory, a Perendale Publishers Limited production.

In this current series of video footage from GRAPAS 2012 we have already seen speeches from industry specialists such as Muyang and Buhler. In part V of this series we are introduced to Mario Rodriguez who represented another industry giant in Tapco Inc.

Tapco Inc. offer expertise in manufacturing elevator buckets and in this 2-part feature Mr Rodriguez discuss elevator bucket maintenance, important for sustaining the life of your equipment and also its value.


Remember to get in touch if you submit your videos or pictures from any of the international milling events that run throughout the year simply by dropping me an email.

Stay tuned for Part VI of GRAPAS 2012!

Alex Rogers

GRAPAS 2012, Thailand Part IV

Good morning and welcome again to another installment of GRAPAS 2012, which took place in Thailand earlier this year. GRAPAS is a key event on any calender hanging on the wall of all milling manufacturers, service providers, experts and indeed millers in general.
The event for 2012 played host to many expert speakers and was attended by representatives from Perendale Publishers who are happy to bring you this footage. Today’s episode features Lukas Armatys from Buhler who are an industry leading producer of milling equipment and expert research internationally. Buhler have consistently participated in the various publications with Perendale and can be found in the International Milling Directory.

GRAPAS 2012, Part III.

This installment of GRAPAS 2012 features Mr Luo speaking on behalf of IMD‘S very own ZCME. Mr Luo is General Manager of Feed Technology at the Chinese milling giant.
He is accompanied by Roger Gilbert who is Director and Chief Editor at Perendale Publishers Limited.

 

GRAPAS 2012, Thailand.

Hello again and welcome to this second installment from GRAPAS 2012 which took place in Thailand earlier this year. Today’s episode features Dr Laddawan Kunnoot, Assistant Director General of Rice Department and Director of Bureau of Rice Products Development.

 

 

Don’t forget if you would like to submit any videos from GRAPAS or any other international milling events please get in touch.
Alex Rogers

GRAPAS 2012, Thailand.

Hello and welcome back to our dedicated subscribers and listed companies. Here at Perendale we pride ourselves on making our presence known at as many international events as we can throughout the year. After all if you’re going to produce the most comprehensive events register for the milling industry, why not use it?

This is why we are often invited to events not just to represent you, our valued clients but to also provide media support for these occasions where the worlds leading experts can all be found under one roof.

So in keeping with our continuing innovation and interaction I would like to introduce the first of our videos in a short series of speakers from GRAPAS 2012, which took place earlier this year in Thailand.

The first speaker is Niphond Wongtra-ngang, Adviser to the Immediate-past Deputy Prime Minister of Thailand, who is discussing the importance of food safety.


Were you at the event? Did you miss any speakers? Would you like to submit a video to us?

Contact me now, I’d love to hear from you!

Alex Rogers.

Perendale’s Birthday Slice

Darren Parris (seated centre) is flanked from left by Iain Gaynor, Alice Neal, Alex Rogers, James Taylor, Lee Bastin, Sophia Pangd and Roger Gilbert. Tuti Tan is taking the photo)

Production halted at Perendale today as Darren Parris, celebrated his birthday by enjoying a slice of cake in the boardroom with his colleagues from the Grain and Feed Milling Technology magazine, International Aquafeed magazine and the International Milling Directory.

Darren is our International Sales and Marketing Manager whom most of you will have spoken to at some point, but he didn’t have time to stick around today as he has made his own special birthday plans, he said, “To celebrate my birthday, I’ll be going to the games myself this weekend!”

He continued, “We’re enjoying following the performances of our customers sports men and women at the Olympics. It’s amazing how many are watching what is occurring in London and have indicated to us how fabulous these games are.”

Everybody at Perendale Publishers Limited wishes Darren a pleasant birthday and a wonderful weekend in London.

O&J HØJTRYK Raise the Bar with New Line

O&J HØJTRYK have recently released a new line of machines that offer clients full control of a range of parameters thanks to the latest digital technology.  The new models are already running and being sold to the USA Markets, Greater Asian Markets as well as the European Market.

CSV14-3 – Countersinking Machine for Ringdies, Fully digital working PLC

The CSV14-3 Countersinking Machine for ring dies with fully digital working PLC is a fully new designed unit for hardened and non-hardened ring dies.

It features an easy loading in/out by crane with  an operators panel that allows full control of parameters in both manual and auto mode. Users can also save the different kinds of die data to be used on identical ring dies.

Constructed for ring dies with a max. Width of
700mm., and a outside diameter from 450mm to 1400mm the CSV13-3 also includes a weblink for remote faultfinding, programming etc. based on clients choice.

CS32-XW Multipurpose Drilling Machine CS32XW

The CS32-XW Machine is a fully new designed unit for hardened and non-hardened ring dies. Easy loading, in/out by crane also with full control of a range of parameters in both manual and auto mode.

The machine is constructed for ring dies with a maximum width of 800 mm., and an outside diameter from 406mm to 1750mm. Weight limit is 2000 kg and includes weblink programming options.

The DG1700 Machine developed by O&J HØJTRYK, is a fully new designed unit for hardened and non-hardened ring dies and rollers
Easy loading, in/out by crane.
The machine is constructed for ring dies with a max. Width of 800 mm., and an outside diameter from Ø450 to Ø1750 mm.
Weight limit is 2000 kg.

The Danish company has for decades been a leading global supplyer within design and manufacturing of machines to the Pelleting Milling Industry.

Their equipment is used by both die manufacturers and service providers of dies and rolls.

For more information on these or any of the products that O&J HØJTRYK provides please visit www.oj-hojtryk.dk.

If you are an IMD listed company interested in promoting your new products get in touch, and discover the many ways that Perendale Publishers Limited can enhance your exposure to the international milling community.  alexr@perendale.co.uk.