Introducing: EUROmilling a/s

The International Milling Billede1Directory is pleased to welcome EUROmilling a/s. A key manufacturer of a wide range of mills, from simple grain mills for small farmers and all the way up to the most complicated and advanced grinding technologies, EUROmilling’s technology is widely used within the agriculture, food, chemical, pharma, wood and oil industry.

Operating on offshore platforms  for some of the largest oil companies and drilling operators in the world, EUROmilling’s synopsis states:

We manufacture hammer mills for virtually any purpose, from small to laboratory use, the slightly larger for agriculture purposes and large industrial mills used for bio energy, Food , chemical and oil industry.

We have a broad knowledge of many different processor and can assist with the construction of the entire processing plants. Euro milling a/s is your assurance of good, stable product that operates for many years.

Euro milling a/s has extensive experience with all blacksmith work both in stainless steel and iron.

Their entry on the International Milling Directory Online has just been approved – check it out HERE!

Don’t forget – register or update your listing in time for July’s publication of the new edition of the International Milling Directory 2013/14 –  click here!

Rentokil advertises in GFMT

480K Milling Intrnational_130X89_PRINT (1)The International Milling Directory  is pleased to announce Rentokil is now a featured advertiser in Grain and Feed Milling Technology magazine!

Rentokil provide fully integrated Total Facilities Management to government and commercial sector organisations of all sizes across all business sectors. They have comprehensive service capabilities in the fields of catering, cleaning, security, buildings M&E and statutory compliance. They hold long term partnering relationships and pride themselves on being a service partner of choice for customers both at home and abroad.

Rentokil are experts in the essentials. Rentokil’s mission is to deliver the essentials to their customers in pest control, hygiene, workwear and plants through their local networks of over 1,000 branches. Their synopsis reads as follows:

Rentokil is the UK’s largest provider of Commercial and Residential Pest Control Services. With more than 600 fully trained Technicians throughout the UK there will be always be one close to you, ready to respond to your needs.

Check out their entry on the International Milling Directory Online HERE!

Don’t forget – register or update your listing in time for July’s publication of the new edition of the International Milling Directory 2013/14 –  click here!

Introducing: Vortex Loading Solutions

The International Milling Directory bolstered its listed members today with an application by Vortex® Loading Solutions. Vortex Valves, based in North America, Latin America, Europe (Germany) and the UK.

As a well-established company in the International Milling Directory – even an advertiser – we welcome Vortex® Loading Solutions to join the other listed members today.

Vortex® Loading Solutions pride themselves on their range of products being dust-free. As the synopsis on the Vortex website states:

Vortex® is considered the world leader in equipment for handling dry bulk solids. Sitting on a 15-acre campus in Salina, KS, our state-of-the-art manufacturing facility and office complex spans over 150,000 square feet.

Our current footprint allows us to introduce lean manufacturing methods supported by advanced fabrication equipment and laser cutting technology.

 

Their entry on the International Milling Directory Online has just been approved – check it out HERE!

Don’t forget – register or update your listing in time for July’s publication of the new edition of the International Milling Directory 2013/14 –  click here!

Introducing: Degpa Foreign Trading Co.

Today thDegpaInternational Milling Directory welcomes Degpa Foreign Trading Co.

Degpa Co. imports and exports all kind of flour, salt, animal feed, boiled and pounded wheat, agricultural machines and the spare parts of these machines. In addition, Degpa distributes and transports building materials, electric materials and different kind of products inside and outside the country.

Degpa’s company synopsis reads as follows:

Turnkey design, manufacture and installation of flour, semolina mills;Compact flour mills, Building floor type flour mills, Semolina mills, Wheat & Maize flour mills, Silos for grain storage, Grain cleaning equipment: Elevators, Separator, Destoner, Horizontal scourer, Milling equipment, Rollermill, Plansifter / Sifters-Purifier, Bran finishers, Screw conveyors, etc, Airlocks European quality at affordable prices!

Their entry on the International Milling Directory Online has just been approved – check it out HERE!

Don’t forget – register or update your listing in time for the July publication of the new edition of the International Milling Directory 2013/14 –  click here!

Introducing: Zhengzhou Amisy Feed Pellet Machinery Co., Ltd

http://www.feed-pellet-mill.com/templets/default/images/head_bg2.jpg

Today the International Milling Directory welcomes Zhengzhou Amisy Feed Pellet Machinery Co., Ltd. The company are devoted to supplying top quality feed pelleting equipment up to Certified European (CE) specifications. They are experts in the design and manufacturing of feed pelleting solutions for the scale feed pellets industry.

Zhengzhou’s company synopsis reads as follows:

Zhengzhou Amisy Machinery is established in 2000 and has since been devoted to supplying top quality feed pelleting equipment up to Certified European (CE) specifications. We are expert in the design and manufacturing feed pelleting solutions for any scale feed pellets industry. We also design and manufacture ancillary equipment used in the pelleting process. Owning a professional team with specialized theoretical and practical background, we can offer full scale service to our customers by developing projects from blueprint , customized solution, machinery production to installation and commission of complete feed pellet plants .

Their entry on the International Milling Directory Online has just been approved – check it out HERE!

Don’t forget – register or update your listing in time for the July publication of the new edition of the International Milling Directory 2013/14 –  click here!

Storage equipment guide

The International Milling Directory was successfully distributed to all key players at IDMA. 10 boxes were shipped over in advance of our participation at this key Turkish event. We also were able to distribute directly to flour millers after the event as we visited Çorum, Aksaray, Konya and Ankara. We passed many silo plants – new and old installations in a number of places. Many were manufactured by advertising partners of the International Milling Directory and were found in both towns and the rural country.

GSI silos in Bolu, Turkey

GSI silos in Bolu, Turkey

One such photo here shows GSI silos at  BOLU UN VE YEM SANAYİİ (translation: Bolu flour and feed industry). This is a key example of the way that storage is valued in Turkey, which is well known now as an important local and international milling industry, which, importantly is growing well.

Please contact the team at the International Milling Directory for more information about getting your silo and storage products into the new International Milling Directory today. Email Tom at tomb@perendale.co.uk or call +44 1242 267700. This edition will be the best  yet for equipment guides!

 

International Milling Directory touches down in IDMA

Ataturk International Airport: the Istanbul Expo Center, which hosts IDMA 2013, is next door

Ataturk International Airport: the Istanbul Expo Center is next door (credit: Ercan Karakas, Wikimedia Commons)

The International Milling Directory (IMD) has set up camp in Istanbul, Turkey for the 5th International Flour, Semolina, Rice, Corn, Bulghur, Feed Milling Machinery & Pulse, Pasta, Biscuit Technologies Exhibition (or IDMA 2013 for short).

Representatives from all over the milling industry have gathered with thousands of agriculture professionals to make this one of the highlights of 2013’s milling calendar. The IMD, together with sister publication Grain & Feed Milling Technology magazine, will be presenting its wares to industry representatives from 120 countries for the full four days of the show.

If you’re at IDMA, or soon will be, Directory co-ordinator Tom Blacker will be ready to provide information and answer your questions. Why not visit him at the Perendale booth (hall 11, stand A-19)?

Enewsletter column: March 2013

The International Milling Directory (IMD) has had a rather a lot of attention recently. We made waves in Louisville with a successful event. Regular and new members were drawn towards our hundreds of copies of the IMD – the 6 boxes we shipped over were snapped up within 2 days, leaving latecomers on the final day with not a lot of availability!

VIV Asia took place in Bangkok in early March. A great honour of the opening reception was a mention for International Milling Directories’ owner and publisher Perendale and Roger Gilbert was a boon for us all back in the office. When we found out the feedback and invitation to chair more CropTech-FeedTech conferences at more VIV events around the world was relayed back, we were all proud of this opportunity in thought leadership. The next event in this series Roger is attending will be in the Netherlands.

The next event draws closer all the time and our build up, tools and ambitions for IDMA in Turkey are very high. This is a bi-annual event in Istanbul will take place over four days and we decided to ship 10 boxes of the IMD to this exciting event. Our large presence will be part of marketing the IMD to returning and new Turkish members and they will be able to see and ask for information about participation in the new edition. On that topic, we are expecting to redesign and improve the functionality of the IMD this year which makes it the leading publication in handbooks for the international milling community.

New companies in the IMD this month: Kay International (India), Aciklar Un Sanayi (Turkey), Jiangsu Myande Food Machinery Co. Ltd. (China) and Dan Corn (Denmark).

I hope that renewal or registration of your company is something you are thinking about. It can be done very quickly and simply at www.internationalmilling.com.

20130402-192407.jpg

Introducing: Dan Corn

DANCORN

DANCORN

Today the International Milling Directory welcomes Dan-Corn A/S. This company are a specialist in the area of milling and mainly operate in Scandanavia however do have good familiarity with the UK. Perendale are looking forward to meeting Jens and others from the company at Cereals 2013 in Lancashire in a matter of months!

 

Dan-Corn’s entry contains a great synopsis now online here at their new company page: https://www.internationalmilling.com/company_4514.html.

We look forward to developing their involvement in the International Milling Directory for the 22nd edition and reckon our users will find them to be totally relevant to milling, storage, drying and handling in feed industries.

Don’t forget – register or update your listing in time for the July publication of the new edition of the International Milling Directory 2013/14 –  click here!

 

DAN-CORN is a specialist within storage, drying and handling of your crops. Our many happy customers have simply made us the most important player in the market.

The International Milling Directory

The International Milling Directory is once again participating at IDMA in Istanbul, Turkey.

Tom Blacker and Darren Parris will be exhibiting at stand A-19 in Hall 11 freely distributing the 21st editions of the International Milling Directory, the latest paper copy issues of Grain & Feed Milling Technology magazine. Do come and find us at the show, along with hundreds of other companies. This is our major show for grain in Turkey. We are already getting in touch with other attending companies for meetings.

Don’t forget – register or update your listing in time for the July publication of the new edition of the International Milling Directory 2013/14 –  click here!